Inspenet, January 18, 2023.
It is the responsibility of the equipment inspector and his employer to guarantee the results of an Inspection carried out, since these may or may not affect the production process of any company, they play a leading role in any manufacturing and repair activity that is carried out. This article describes in a very general way, the important interrelation that exists between the equipment inspector and its reliability, before the client’s asset.

Author: Lic. Carlos Lasarte. General Director CEACA, SA October 31, 2022.
This article presents a proposal to be considered, to move from a routine of periodic regulatory inspections and a traditional operational control focused on the assurance of the required steam production, based on the Condition Assessment methodology.

Author. ing Edward Madrid. February 16, 2022.
The radiant chamber tubes of a Hydrogen Reformer are constantly exposed to high temperatures. In addition to the working time measured in hours of service, what other factors influence the replacement of the tubes?

Author: Ing. Mario J, Toyo. Inspfalca, January 19, 2022.
The encapsulation process welded in pipe; It is the result of wrapping a metal pipe with a diameter (Example 4” Ø) with another metal pipe (6” Ø); using welding for the fixing and sealing of the envelope or capsule according to the procedure and engineering design.

Author: Lic. Carlos Lasarte, November 15, 2021.
The objective of this work is to analyze the failures in the boilers through the analysis of the internals of the steam generation system, the auxiliary equipment, the operating procedures, in order to guarantee the mechanical integrity, reliability and operational safety of these equipment. They have a wide application in the oil and gas industry, as steam generators for different industrial processes.

It is assured and very particularly I confirm it; that visual inspection as the first step is the most important of all evaluations, trying to identify possible problems with the naked eye during the inspection of industrial equipment; which will depend on the criteria to be applied thanks to the knowledge, ability and accumulated experience.